
SNW-1000 ( Si3N4 )
Reference: NIST Technical Note
Reference: NIST Structural Ceramics Database
Note: About Property Data Summaries.
Note: Abbreviations and Other Notes
Note: Other Materials
Material Summary:
[Ref. 1,2,3]
Manufacturer........: GTE Sylvania
Material Designation: SNW-1000
Material Form.......: polycrystal
Composition.........: Si3N4
Processing..........: sintered
References:
[1] T.E. Easler, R.C. Bradt, and R.E. Tressler, "Effects of Oxidation and Oxidation Under Load
on Strength Distributions of Si3N4," Journal of the American Ceramic Society,
Vol. 65, pp. 317-320 (1982).
[2] C.A. Tracy and G.D. Quinn, "Fracture Toughness by the Surface Crack in Flexure (SCF) Method,"
Ceramic Engineering and Science Proceedings, Vol. 15, pp. 837-845 (1994).
[3] G. D. Quinn, J. J. Swab, and M. D. Hill, "Fracture Toughness by the Surface Crack in Flexure
(SCF) Method: New Test Results," Ceramic Engineering and Science Proceedings, Vol. 18 (4),
pp. 163-172 (1997).
Property Table:
Temperature = 23 °C
Grain Porosity Fracture Fracture Measurement Measurement Comments
Size Toughness Energy Method Environment
[µm] [%] [MPa·m1/2] [J/m2]
------ -------- ------------ --------- ----------- ----------- --------------------------------
4.0 CF air Ref. 1; 3.00 g/cm3; E = 240 GPa
--------------------------------------------------------------------------------------------------------
<5 5 4.7 SCF air Ref. 2; 3.26 g/cm3; E = 248 GPa
--------------------------------------------------------------------------------------------------------
6.4 SCF air Ref. 3; 3.29 g/cm3; E = 281 GPa
--------------------------------------------------------------------------------------------------------
|